Nikon COOLPIXS3300BLK Preparation 2 Charge the Battery, Keep the camera turned off, Charge lamp

Preparation 2 Charge the Battery

Basic Steps for Shooting and Playback

1 Prepare the included Charging AC Adapter EH-69P.

• If a plug adapter* is included, attach the plug adapter to the plug on the Charging AC Adapter. Push the plug adapter firmly until it is securely held in place. Once the two are connected, attempting to forcibly remove the plug adapter could damage the product.

* The shape of the plug adapter varies according to the country or region in which the camera was purchased.

The Charging AC Adapter comes with the plug adapter attached in Argentina and Korea.

2Make sure the battery is installed in the camera, and then connect the camera to the Charging AC Adapter in order of 1to 3.

•Keep the camera turned off.

•Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle, and do not use force when connecting or disconnecting the plugs.

Charge lamp	Electrical
	outlet

USB Cable UC-E6 (included)

•The charge lamp slowly flashes green to indicate that the battery is charging.

•About 2 hours and 30 minutes are required to charge a fully exhausted battery.

•When the battery has been completely charged, the charge lamp turns off.

•See “Understanding the Charge Lamp” (A17) for more information.

3Disconnect the Charging AC Adapter from the electrical outlet and then disconnect the USB cable.

•When the camera is connected to the electrical outlet with the EH-69P, the camera cannot be turned on.

16