Nikon coolpix s3300, COOLPIXS3300BLK manual Using the Self-timer, Focus and exposure will be set

Features That Can Be Set Using the Multi Selector

Using the Self-timer

The camera is equipped with a self-timer that releases the shutter ten seconds or two seconds after you press the shutter-release button. The self-timer is useful when you want to be in the picture you are taking, and when you want to avoid the effects of camera shake that occur when you press the shutter-release button. When using the self-timer, use of a tripod is recommended. Set Vibration reduction to Off in the setup menu (A86) when using a tripod to stabilize the camera during shooting.

1Press the multi selector J(nself-timer).

2Press the multi selector Hor Ito choose

n10s or n2s and press the kbutton.

• n10s (ten seconds): Use on important occasions, such
	as weddings
•	n2s (two seconds): Use to prevent camera shake
•	If a setting is not applied by pressing the k button
		Self-timer
	within a few seconds, the selection will be canceled.

•When the shooting mode is set to Pet portrait scene mode, Y(Pet portrait auto release) is displayed (A46). The self-timer settings n10s and n2s cannot be used.

3Frame the picture and press the

shutter-release button halfway. 10

• Focus and exposure will be set.

1 / 2 5 0 F 3.5

Shooting Features

4Press the shutter-release button the rest of the way down.

•The self-timer starts, and the number of seconds remaining before the shutter is released is displayed in the monitor. The self- timer lamp flashes while the timer is counting down. About one second before the shutter is released, the lamp stops flashing and glows steadily.

•When the shutter is released, the self-timer will be set to OFF.

•To stop the timer before a picture is taken, press the shutter-release button again.

9

1 / 2 5 0 F 3.5

55