Error Messages

Refer to the table below if an error message is displayed.

Display

Cause/Solution

A

 

 

Battery temperature is

 

 

 

 

elevated. The camera

 

 

 

 

will turn off.

The camera turns off automatically. Wait until the camera or

 

The camera will turn

battery temperature has cooled before resuming use.

 

 

 

 

off to prevent

 

 

 

 

overheating.

 

 

 

 

 

 

 

 

 

Memory card is write

The write-protect switch is in the “lock” position. Slide the

 

protected.

write-protect switch to the “write” position.

 

 

 

 

 

 

 

 

 

This card cannot be

An error occurred while accessing the memory card.

 

 

 

used.

Use an approved card.

14,

 

 

This card cannot be

Check that the terminals are clean.

F20

 

read.

Confirm that the memory card is correctly inserted.

 

 

 

 

 

 

 

 

 

The memory card has not been formatted for use in the

 

 

 

 

camera.

 

 

Reference

Card is not formatted.

Formatting deletes all data saved on the memory card. If you

 

 

 

 

 

need to keep copies of any images, make sure to select No

F5

 

Format card?

 

and save the copies to a computer or other medium before

 

 

 

 

 

 

 

 

formatting the memory card. Select Yes and press the k

 

 

Section

 

The write-protect switch of the Eye-Fi card is in the “lock”

 

 

 

button to format the memory card.

 

 

 

 

position.

 

Not available if Eye-Fi

 

 

 

 

 

 

 

An error occurred while accessing the Eye-Fi card.

 

 

 

card is locked.

14

 

 

Check that the terminals are clean.

 

 

 

 

 

 

 

 

Confirm that the Eye-Fi card is correctly inserted.

 

 

 

 

 

 

 

 

E75