|
| Problem |
| Cause/Solution | A |
|
|
| • | The camera automatically turns off to save | |
|
|
| • | power (auto off function). | |
|
|
| The camera and battery may not work properly | ||
|
|
|
| at low temperatures. |
|
|
| The camera turns off without | • | The inside of the camera has become hot. Leave | – |
|
| warning. |
| the camera off until the inside of the camera has |
|
|
|
|
| cooled, and then try turning it on again. |
|
|
|
| • | The camera turns off if the USB cable | |
|
|
|
| connecting it to a computer or printer is |
|
|
|
|
| disconnected. Reconnect the USB cable. |
|
|
|
|
|
|
|
|
|
| • | The camera is off. | |
|
|
| • | The battery is exhausted. | |
|
|
| • | The camera has entered standby mode to save | |
|
|
|
| power. Press the power switch, |
|
|
|
|
| button, Abutton, cbutton, or b(emovie- |
|
|
| Monitor is blank. | • | record) button. |
|
|
| The flash lamp flashes while the flash is | |||
|
|
| |||
|
|
| • | charging. Wait for the flash to charge. |
|
|
|
| The camera and computer are connected via | ||
Technical |
|
| • | the USB cable. | |
| Monitor is hard to read. | The camera and TV are connected via an audio | |||
| • | Adjust the monitor brightness. | 73, E62 | ||
|
|
|
| video cable. |
|
Notes |
|
| • | The monitor is dirty. Clean the monitor. | |
|
|
|
|
| |
|
| • If the camera clock has not been set, the “Date |
| ||
|
|
|
| ||
and |
|
|
| not set” indicator flashes during shooting and |
|
|
|
| movie recording. Images and movies recorded |
| |
|
|
|
|
| |
Index |
|
|
| before the clock is set are dated “00/00/0000 |
|
| Date and time of recording |
| 00:00” and “01/01/2014 00:00” respectively. Set | ||
|
| are not correct. |
| the correct time and date for Time zone and | |
|
|
| date in the setup menu. |
| |
|
|
|
|
| |
|
|
| • The camera clock is not as accurate as ordinary |
| |
|
|
|
| watches or clocks. Periodically compare the time |
|
|
|
|
| of the camera clock with that of a more accurate |
|
|
|
|
| timepieces, and reset as required. |
|
|
|
|
|
|
|
F8