224
Q
Connecting to a Computer
This section describes how to connect the camera to a computer
using the supplied UC-E4 USB cable.
Once the camera is
connected, Nikon Transfer or optional Nikon software such as
Camera Control Pro 2 can be used to copy photographs to the
computer or control the camera remotely.
DConnecting Cables
Be sure the camera is off when connecting or disconnecting interface
cables.
Do not use force or attempt to insert the connectors at an angle.
ACamera Control Pro2
Camera Control Pro2 (available separately; pg. 368) can be used to control
the camera from a computer.
Before connecting the camera, set the
camera [USB] option (pg. 225) to [MTP/PTP].
When Camera Control Pro2
is running, “c” will be displayed in the control panel.