293
U
❚❚Commander Mode

Use the built-in flash as a master flash controlling one or more

remote optional SB-900, SB-800, SB-600, or SB-R200 flash units in

up to two groups (A and B) using advanced wireless lighting.

Selecting this option displays the menu

shown at right.

Press 4 or 2 to highlight the

following options, 1 or 3 to change.

Option Description
Built-in
flash Choose a flash mode for the built-in flash (commander flash).
TTL i-TTL mode.
Choose flash compensation from values between
+3.0 and –3.0EV in increments of 1/3EV.
MChoose the flash level from values between [Full] and [1/128]
(1/128 of full power).
––
The built-in flash does not fire, but the AF-assist illuminator
lights.
The built-in flash must be raised so that it can emit
monitor pre-flashes.
Group A Choose a flash mode for all flash units in group A.
TTL i-TTL mode.
Choose flash compensation from values between
+3.0 and –3.0EV in increments of 1/3EV.
AA
Auto aperture (available only with SB-900 and SB-800 flash
units).
Choose flash compensation from values between +3.0
and –3.0EV in increments of 1/3EV.
MChoose the flash level from values between [Full] and [1/128]
(1/128 of full power).
–– The flash units in this group do not fire.
Group B Choose a flash mode for all flash units in group B.
The options
available are the same as those listed for [Group A], above.
Channel Choose from channels 1–4.
All flash units in both groups must
be set to the same channel.