230

t
4Select Done.
Highlight Done and press
J.
The specified focal
length and aperture will be
stored under the chosen
lens number.
To recall lens data when using a non-CPU lens:
1Assign non-CPU lens number selection to a camera
control.
Select Choose non-CPU lens number as the “Press +
command dials” option for a camera control in the Custom
Settings menu (0332).
Non-CPU lens number selection can
be assigned to the Fn button (Custom Setting f3, Assign Fn
button, 0328), the Pv button (Custom Setting f4, Assign
preview button, 0333), or the center of the sub-selector
(Custom Setting f6, Assign sub-selector center, 0333).
2Use the selected control to choose a lens number.
Press the selected control and rotate the main or sub-
command dial until the desired lens number is displayed in
the top control panel.
J button
Lens number
Main command dial
Focal
length
Maximum
aperture