Nikon D50 manual Troubleshooting, 120, Technical Notes-Troubleshootng, Problem Solution

Models: D50

1 148
Download 148 pages 45.82 Kb
Page 130
Image 130
Reset switch

Technical Notes—Troubleshootng

120

Troubleshooting

If the camera fails to function as expected, check the list of common prob- lems below before consulting your retailer or Nikon representative. Refer to the page numbers in the right-most column for more information.

Problem

Solution

 

Camera takes time to turn on.

Delete files or folders.

84

Viewfinder is out of focus.

•Adjust viewfinder focus.

13

•Use optional diopter adjustment lens.

113

 

Viewfinder is dark.

Charge battery or insert charged battery.

14

Displays turn off without warning.

Choose longer monitor off or meter of

100

 

delays.

 

Unusual characters displayed in See “A Note on Electronically Controlled

control panel

Cameras,” below.

 

Displays in control panel or view-

Displays are affected by high or low tem-

finder are slow and dim

peratures.

 

•Fine lines around active focus

These phenomena are normal and do not

 

area in viewfinder

•Viewfinder display turns red

indicate a malfunction.

 

 

 

Menu item is not displayed.

Select Detailed for CSM/Setup Menu.

69

Menu item is unavailable.

Choose another mode or insert memory 11

card.

101

 

Image size can not be changed.

NEF (Raw) or NEF+JPEG Basic selected for

31

 

image quality.

 

 

•Aperture not locked at highest f/-number. 7

Shutter release is disabled.

•Memory card is locked.

11

•Memory card is full.

14

 

 

•Flash is charging.

18

A Note on Electronically-Controlled Cameras

In extremely rare instances, unusual characters may appear in the control panel and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, and turn the camera on again, or, if you are using an AC adapter (available sepa- rately), disconnect and reconnect the adapter and turn the camera on again. If the problem persists, press the reset switch (see right) and then reset the camera clock to the correct date and time (68). In the event of

continued malfunction, contact your retailer or Nikon representative. Note that disconnecting the power source as described above may result in loss of any

data not recorded to the memory card at the time the problem occurred. Data already recorded to the card will not be affected.

Page 130
Image 130
Nikon D50 manual Troubleshooting, 120, Technical Notes-Troubleshootng, Problem Solution, Select Detailed for CSM/Setup Menu