Wireless Remote Control ML-L3(0 67): Use as a remote shutter release for self-portraits or to prevent blur caused by camera shake. The ML-L3 uses a 3 V CR2025 battery.

Remote controls

 

Pressing the battery-chamber latch to the right (q), insert a fingernail into the gap

 

and open the battery chamber (w). Ensure that the battery is inserted in the

 

correct orientation (r).

 

The D5000 is equipped with an accessory terminal for

 

MC-DC2 remote cords (0 86) and GP-1 GPS units

Accessory

(0 114), which connect with the 4 mark on the

terminal

connector aligned with the 2 mark next to the

accessories

accessory terminal as shown at right (to access the

 

accessory terminal, open the connector cover; close the

 

cover when the terminal is not in use).

Approved Memory Cards

The following SD memory cards have been tested and approved for use in the D5000. All cards of the designated make and capacity can be used, regardless of speed.

SanDisk 512 MB, 1 GB, 2 GB *, 4 GB †, 8 GB †, 16 GB †

Toshiba 512 MB, 1 GB, 2 GB *, 4 GB †, 8 GB †, 16 GB †, 32 GB †

Panasonic 512 MB, 1 GB, 2 GB *, 4 GB †, 6 GB †, 8 GB †, 12 GB †, 16 GB †, 32 GB †

512 MB, 1 GB, 2 GB *, 4 GB †, 8 GB †

Lexar Media Platinum II: 512 MB, 1 GB, 2 GB *, 4 GB † 8 GB † Professional: 1 GB, 2 GB *, 4 GB † 8 GB †

* If card will be used with card reader or other device, check that the device supports 2GB cards.

† SDHC compliant. If card will be used with card reader or other device, check that the device supports SDHC.

Other cards have not been tested. For more details on the above cards, please contact the manufacturer.

n

203