122

r
3Select a preset.
Press the L (U) button and rotate the sub-command dial until the desired
white balance preset (d-1 to d-4) is displayed in the control panel.
4Select direct measurement mode.
Release the L (U) button briefly and then press the
button until the L icon in the control panel starts to
flash.
A flashing D will also appear in the viewfinder.
The displays will flash for about six seconds.
5Measure white balance.
Before the indicators stop flashing, frame the reference
object so that it fills the viewfinder and press the
shutter-release button all the way down.
The camera
will measure a value for white balance and store it in the preset selected in Step
3.
No photograph will be recorded; white balance can be measured accurately
even when the camera is not in focus.
L (U) button Sub-command dial Control panel
AProtected Presets
If the current preset is protected (0127), 3 will flash in the control panel and viewfinder
if you attempt to measure a new value.
Control panel
Viewfinder