150

l
5Recompose the photograph.
6Take t he p hot ogra ph.
Press the shutter-release button the rest of the way down to shoot.
If desired,
additional pictures can be taken without releasing FV lock.
7Release FV lock.
Press the Fn button to release FV lock.
Confirm that the FV lock icon (e) is no
longer displayed in the viewfinder.
DUsing FV Lock with the Built-in Flash
FV lock is only available with the built-in flash when TTL is selected for Custom Setting e3
(Flash cntrl for built-in flash, 0236).
AUsing FV Lock with Optional Flash Units
FV lock is also available with optional flash units in TTL and (where supported) monitor pre-
flash AA and monitor pre-flash A flash control modes.
Note that when commander mode is
selected for Custom Setting e3 (Flash cntrl for built-in flash, 0236), you will need to set
the flash control mode for the master or at least one remote group to TTL or AA.
AMetering
The metering areas for FV lock when using optional flash unit are as follows:
Flash unit Flash mode Metered area
Stand-alone flash unit i-TTL 5-mm circle in center of frame
AA Area metered by flash exposure meter
Used with other flash units
(Advanced Wireless Lighting)
i-TTL Entire frame
AA Area metered by flash exposure meter
A (master flash)
ASee Also
For information on using the depth-of-field preview or AAE-L/AF-L button for FV lock, see
Custom Setting f3 (Assign preview button, 0244) or Custom Setting f4 (Assign AE-L/AF-L
button, 0244).