241
U
If On is selecte d whe n the c amer a is being used with the built-in
flash or an optional CLS-compatible flash unit (0294), a
modeling flash will be emitted when the camera depth-of-field
preview button is pressed (077).
No modeling flash is emitted
if Off is selected.
Choose the setting or settings bracketed when auto bracketing (0153) is in effect.
Choose AE & flash (j) to perform both exposure and flash-level bracketing, AE only
(k) to bracket only exposure, Flash only (l) to perform only flash-level bracketing,
WB bracketing (m) to perform white-balance bracketing (0156), or ADL
bracketing (y) to perform bracketing using Active D-Lighting (0158).
Note that
white balance bracketing is not available at image quality settings of NEF (RAW) or
NEF(RAW) + JPEG.
At the default setting of MTR> und er > over (H), exposure, flash, and white balance
bracketing are performed in the order described on pages 153 and 156.
If
Under> MTR > over (I) is selected, shooting will proceed in order from the
lowest to the highest value.
This setting has no effect on ADL bracketing.
Choose the role played by the J button during shooting: selecting the center focus
point (JSelect center focus point), highlighting the active focus point
(KHighlight active focus point), or none (Not used).
e5: Modeling Flash G button ➜ACustom Settings menu
e6: Auto Bracketing Set G button ➜ACustom Settings menu
e7: Bracketing Order G button ➜ACustom Settings menu
f: Controls
f1: OK Button (Shooting Mode) G button ➜ACustom Settings menu