260
U
This option is displayed o nly when an Eye-Fi mem ory card ( available s eparately from
third-party suppliers) is inserted in the camera.
Choose Enable to upload
photographs to a preselected destination.
Note that pictu res will no t be upload ed if
signal strength is insufficient.
Observe all local laws concerning wireless devices and choose Disable where
wireless devices are prohibited.
When an Eye-Fi card is inserted, its status is indicated by an icon
in the information display:
d: Eye-Fi upload disabled.
e: Eye-Fi upload enabled but no pictures available for upload.
f (static): Eye-Fi upload enabled; waiting to begin upload.
f (animated): Eye-Fi upload enabled; uploading data.
g: Error — camera can not control Eye-Fi card.
If a flashing W appears in the
control panel or viewfinder, refer to page 324; if this indicator is not flashing,
pictures can be taken normally but you may be unable to change Eye-Fi settings.
View the current camera firmware version.
Eye-Fi Upload G button Bsetup menu
DEye-Fi Cards
Eye-Fi cards may emit wireless signals when Disable is selected.
If a warning is displayed in
the monitor (0324), turn the camera off and remove the card.
See the manual provided with the Eye-Fi card, and direct any inquiries to the manufacturer.
The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi
functions.
ASupported Eye-Fi Cards
As of December 2011, the camera supports 8 GB SDHC Pro X2 Eye-Fi cards.
Some cards may
not be available in some countries or regions; consult the manufacturer for more
information.
Eye-Fi cards are for use only in the country of purchase.
Be sure the Eye-Fi card
firmware has been updated to the latest version.
AUsing Eye-Fi Cards in Ad Hoc Mode
Additional time may be required when connecting using Eye-Fi cards that support ad hoc
mode.
Set Custom Setting c2 (Standby timer, 0227) to 30 s or longer.
Firmware Version G button Bsetup menu