173

t
The camera can store data for up to nine non-CPU lenses.
To enter or edit data for a
non-CPU lens:
1Select Non-CPU lens data.
Press the G button to display the menus.
Highlight Non-CPU lens data in the setup
menu and press 2.
2Choose a lens number.
Highlight Lens number and press 4 or 2 to
choose a lens number between 1 and 9.
3Enter the focal length and aperture.
Highlight Focal length (mm) or Maximum
aperture and press 4 or 2 to edit the
highlighted item.
Focal lengt h can be
selected from values between 6 and
4,000mm, maximum aperture from values
between f/1.2 and f/22.
4Select Done.
Highlight Done and press J.
The specified
focal length and aperture will be stored
under the chosen lens number.
AFocal Length Not Listed
If the correct focal length is not listed, choose the closest value greater than the actual
focal length of the lens.
ATeleconverters and Zoom Lenses
The maximum aperture for teleconverters is the combined maximum aperture of the
teleconverter and the lens.
Note that lens data are not adjusted when non-CPU lenses
are zoomed in or out.
The data for different focal lengths can be entered as separate
lens numbers, or the data for the lens can be edited to reflect the new values for lens
focal length and maximum aperture each time zoom is adjusted.
G button