3Select a preset.

Press the L(U) button and rotate the sub-command dial until the desired white balance preset (d-1 to d-4) is displayed in the control panel.

L(U) buttonSub-command dial Control panel

4 Select direct measurement mode.

Release the L(U) button briefly and then press the

 

button until the Licon in the control panel starts to

 

flash. A flashing Dwill also appear in the viewfinder.

 

The displays will flash for about six seconds.

Control panel

 

Viewfinder

5

r

Measure white balance.

Before the indicators stop flashing, frame the reference

object so that it fills the viewfinder and press the shutter-release button all the way down. The camera

will measure a value for white balance and store it in the preset selected in Step

3.No photograph will be recorded; white balance can be measured accurately even when the camera is not in focus.

AProtected Presets

If the current preset is protected (0 127), 3will flash in the control panel and viewfinder if you attempt to measure a new value.

122