Nikon D800EFXBODY, D800 (Body Only), D800 E, D800BODY, 2164+25468 Remote Cords, Recording Movies

ARemote Cords

If Record movies is selected for Custom Setting g4 (Assign shutter button, 0 324), the shutter-release buttons on optional remote cords (0 390) can be used to start movie live view and to start and end movie recording.

DRecording Movies

Flicker, banding, or distortion may be visible in the monitor and in the final movie under fluorescent, mercury vapor, or sodium lamps or if the camera is panned horizontally or an object moves at high speed through frame (flicker and banding can be reduced using Flicker reduction 0 329). Bright light sources may leave after-images when the camera is panned. Jagged edges, false colors, moiré, and bright spots may also appear. Bright bands may appear at the top or bottom of the frame if the subject is briefly illuminated by a strobe or other bright, momentary light source. When recording movies, avoid pointing the camera at the sun or other strong light sources. Failure to observe this precaution could result in damage to the camera’s internal circuitry.

Flash lighting can not be used during movie live view.

Recording ends automatically if the lens is removed.

Live view may end automatically to prevent damage to the camera’s internal circuits; exit live view when the camera is not in use. Note that the temperature of the camera’s internal circuits may rise and noise (bright spots, randomly-spaced bright pixels, or fog) may be displayed in the following instances (the camera may also become noticeably warm, but this does not indicate a malfunction):

•The ambient temperature is high

•The camera has been used for extended periods in live view or to record movies

•The camera has been used in continuous release mode for extended

periods

If live view does not start when you press the abutton, wait for the internal circuits to cool and then try again.

y

69