Nikon D800 E (Body Only), D800EFXBODY Interrupting Interval Timer Photography, No Photograph, 206

❚❚Interrupting Interval Timer Photography

Interval timer shooting will end automatically if the battery is exhausted. Interval timer photography can also be ended by:

•Selecting Start > Off in the interval timer menu

•Performing a two button reset (0 193)

•Resetting settings for the current shooting menu bank using the Shooting menu bank item in the shooting menu (0 270)

•Changing bracketing settings (0 132)

•Terminating HDR (0 176) or multiple exposure shooting (0 195) Normal shooting will resume when interval timer photography ends.

❚❚No Photograph

The camera will skip the current interval if any of the following situations persist for eight seconds or more after the interval was due to start: the photograph or photographs for the previous interval have yet to be taken, the memory buffer is full, or the camera is unable to focus in AF-S(note that the camera focuses again before each shot). Shooting will resume with the next interval.

t

ARelease Mode

Regardless of the release mode selected, the camera will take the specified number of shots at each interval. In CH (continuous high speed) mode, photographs will be taken at the rate given on page 104. In S (single frame) and CL (continuous low-speed) modes, photographs will be taken at the rate chosen for Custom Setting d2 (CL mode shooting speed, 0 293) in mode J, camera noise will be reduced.

AShooting Menu Banks

Changes to interval timer settings apply to all shooting menu banks

(0 269). If shooting menu settings are reset using the Shooting menu bank item in the shooting menu (0 270), interval timer settings will be

reset as follows:
• Choose start time: Now		• Number of shots: 1
•	Interval: 00:01':00"	• Start shooting: Off
•	Number of intervals: 1

206