Nikon F65D instruction manual Focus Area

Focus Area

This camera’s five focus areas cover a wide frame area, and you can select among them, depending on the subject’s position in the frame or your desired composition. When the focus mode is set to AF (autofocus, page 44), you can select either Dynamic AF Mode with Closest-Subject Priority, where the camera automatically selects the focus area, or Dynamic AF Mode, where you select the desired focus area.

Set the focus mode selector to AF (autofocus) and rotate the Command Dial while pressing the focus area button to select focus area.

• Rotating the Command Dial while pressing the focus area button changes the display as follows:

Dynamic AF Mode with	Dynamic AF Mode
Closest-Subject Priority

•Confirm selected focus area in the LCD panel and viewfinder.

•Dynamic AF Mode with Closest-Subject Priority

Dynamic AF Mode with Closest-Subject Priority automatically maintains focus on the subject located closest to any of five focus areas and focus is locked once it is achieved. If the subject moves from the selected focus area before focus lock,

the camera automatically focuses on the subject determining the data from the other focus areas. When a AUTO mode or Vari-Program (except f Close-Up mode) is selected, Dynamic AF Mode with Closest-Subject Priority is automatically selected.

•Dynamic AF Mode

Focus is obtained at the selected focus area and focusing is locked (as long as the shutter release button is lightly pressed) once it is achieved. If the subject

moves from the selected focus area before focus lock, the camera automatically focuses on the subject determining the data from the other focus areas. When f Close-Up mode is selected, Dynamic AF Mode and centre focus area are automatically selected.

46

•When focus mode is set to Manual

Single Area Mode is automatically selected when the focus mode selector is set to M (manual, page 45).

Set the focus mode selector to M (manual) and rotate the Command Dial while pressing the focus area button to select focus area.

• Single Area Mode

Focus is obtained only at the selected focus area when using the manual focus with Electronic Rangefinder (page 45).

• Rotating the Command Dial while pressing the focus area button changes the display as follows:

viewfinder.	OPERATION
• Confirm selected focus area in the LCD panel and
	DETAILED

47