Nikon F65D instruction manual Depth-of-Field Preview, Remote Control Operation optional

Depth-of-Field Preview

Electronic preview function is available with this camera. Depress the depth-of-field preview button to confirm the depth of field through the viewfinder (see page 74).

•Pressing the depth-of-field button stops the lens down to the aperture controlled in a (AUTO mode), Vari-

Program, Auto-Multi Program or Shutter-Priority Auto exposure mode, and down to the aperture selected in Aperture-Priority Auto or Manual exposure mode. By looking through the viewfinder, the approximate depth of field with the given aperture can be confirmed.

Remote Control Operation (optional)

Use the optional remote control to release the camera’s shutter from a distance. As with self-timer operation, the remote control can also be used when you want to be in the photograph. You can also use the remote control instead of a cable release to reduce camera shake.

1 Press the v remote control button a number of times so B (immediate release) or * (two-sec. delay release) appears in the LCD panel. (Or, rotate the Command

Dial while pressing the v remote control button.) The display changes as follows:

		No display
		(cancel)
	Self-timer
• You can choose to release the shutter either			OPERATION
immediately after (B) or two sec. after (*) the
shutter release button on the remote control unit is			DETAILED
pressed.

• Once remote control operation is set, the camera remains ready to receive a signal from the remote control unit for 60 sec. If no signal is sent for 60 sec., the remote control mode is cancelled and B or * disappears from the LCD panel.

• The remote control cannot be operated unless the camera’s shutter can be released (i.e. when subject is not in focus with autofocus).

• After the shutter is released, the camera remains ready to receive another signal from the remote control unit for 60 sec.

NOTE: Before using remote control

When using the remote control for the first time, make sure to pull out the insulation sheet placed on the battery inside the remote control unit that is set when purchased.

68 69