Nikon F65D instruction manual Using Built-In Speedlight-continued

Using Built-In Speedlight—continued

3 Confirm fi appears in the viewfinder, make sure the subject is within the flash shooting distance range and shoot.

•The shutter cannot be released unless fi appears without blinking in the viewfinder.

•fi in the viewfinder blinks approx. 3 sec. after full flash output. This may indicate underexposure has occurred. Check the focus distance, aperture or flash shooting distance range and shoot again.

•When the subject is dark, the AF-Assist Illuminator automatically turns on to guide autofocus. See page 48 for details.

•With VR Nikkor lenses, the vibration reduction function when shutter release button is lightly pressed does not operate while the flash is charging.

Exposure mode	Available shutter speed	Available aperture	Page
a	Automatically set to 1/90-1/60 sec.		51
s			37
d	Automatically set to 1/90-1/15 sec.		37
f	Automatically set to 1/90 sec.	Automatically set	37
g			38
h	Automatically set to 1/90-1 sec.		38
P	Automatically set to 1/90 sec.*1		52
S	1/90-30 sec.*2		54
A	Automatically set to 1/90 sec.*1	Desired setting*3	56
M	1/90-30 sec.*2, --(Time)		58

*1 Shutter speed is prolonged up to 30 sec. with Slow Sync, Rear-Curtain Sync and Red-Eye Reduction with Slow Sync.

*2 Shutter speed shifts automatically to 1/90 sec. when the shutter speed is set to faster than 1/90 sec. and the built-in Speedlight pops up (or attached optional Speedlight is turned on). In this case, 90 appears in the viewfinder and the selected shutter speed display blinks in the LCD panel.

*3 Flash shooting distance range depends on the ISO speed of the film in use and aperture setting. In Aperture-Priority Auto or Manual exposure mode, set the aperture according to the flash shooting distance range table on page 84.

Speedlight

82 83