Nikon F 100 Confirm indications in the viewfinder while lightly, Aperture are shown in 1/3 steps

Models: F 100

1 57
Download 57 pages 18.47 Kb
Page 15
Image 15

Confirm Indications in Viewfinder and Release Shutter

7

Confirm that / (in-focus

indicator) appears in the

viewfinder, then slowly, fully

 

depress the shutter release

 

button. Camera automatically

 

tracks subject that has been

 

moving.

7.1

Confirm indications in the viewfinder while lightly

pressing the shutter release button. (Shutter speed

 

and aperture are shown in 1/3 steps.)

If any warning indications appear in the LCD panel or viewfinder, see page 46.

·2: Shutter speed and aperture can be changed to display settings in steps of 1/2 or one (page 71).

7.Confirm that focus indicator / appears and slowly

2

depress the shutter release button.

After shutter is released, the film automatically advances to the next frame and the next shot can be taken.

28

 

 

 

Check points

 

OPERATION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Focus, shutter speed and aperture can be confirmed in the

 

 

 

 

 

 

 

 

viewfinder. If any other warning indications appear, see page 46.

 

 

 

 

 

When you reach the end of the film roll, End blinks in the LCD panel.

 

BASIC

 

 

 

 

 

 

For mid-roll rewind, see page 34.

 

 

 

 

Press the two film rewind buttons simultaneously to rewind film.

 

 

 

 

 

For self-timer operation, see page 67.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

For remote control operation, see page 94.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7.3

When you reach the end of the film roll, End blinks in

 

 

the LCD panel. Press the two film rewind buttons

 

 

 

 

 

 

simultaneously for approx. 1 sec. to rewind film.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

o––blinks in the LCD panel during film rewind and the frame counter counts down backwards until rewind is complete.

Pictures taken on frames beyond the indicated number of the exposures

for the film roll may be discarded in the process of developing.

· 1: Film rewind can be changed to start automatically when the end of a film roll is reached (page 71).

7.4

Confirm that film is completely rewound, then

remove film cartridge.

Film is completely rewound when the frame counter shows blinking “E”. (E appears without blinking when the exposure meter is off.) Open the camera back away from sunlight and remove the film cartridge by tilting it to one side.

29

Page 15
Image 15
Nikon F 100 Confirm indications in the viewfinder while lightly, Pressing the shutter release button. Shutter speed