Nikon F 100 instruction manual With 1/3 steps, With 1/2 steps, With one steps

Auto Exposure/Flash Exposure Bracketing—continued

•Rotating the Sub-Command Dial while pressing the Auto Exposure/Flash Exposure Bracketing button W changes the setting as follows (when compensation value is set in steps of 1/3, 1/2 or one with Custom Setting):

1. With 1/3 steps

Number of shots and	Electronic analog	Shooting order
compensated EV value	exposure display
t2F0.3		0, +0.3
t2F0.7		0, +0.7
t2F1.0		0, +1.0
y2F0.3		0, –0.3
y2F0.7		0, –0.7
y2F1.0		0, –1.0
3F0.3		0, –0.3, +0.3
3F0.7		0, –0.7, +0.7
3F1.0		0, –1.0, +1.0
t3F0.3		+0.3, 0, +0.7
t3F0.7		+0.7, 0, +1.3
t3F1.0		+1.0, 0, +2.0
y3F0.3		–0.3, –0.7, 0
y3F0.7		–0.7, –1.3, 0
y3F1.0		–1.0, –2.0, 0

2. With 1/2 steps

	Number of shots and	Electronic analog	Shooting order
	compensated EV value	exposure display
	t2F0.5		0, +0.5
	t2F1.0		0, +1.0
	y2F0.5		0, –0.5
	y2F1.0		0, –1.0
	3F0.5		0, –0.5, +0.5
	3F1.0		0, –1.0, +1.0
	t3F0.5		+0.5, 0, +1.0
	t3F1.0		+1.0, 0, +2.0
	y3F0.5		–0.5, –1.0, 0
58	y3F1.0		–1.0, –2.0, 0

3. With one steps

Number of shots and	Electronic analog	Shooting order
compensated EV value	exposure display
t2F1.0		0, +1.0
y2F1.0		0, –1.0
3F1.0		0, –1.0, +1.0
t3F1.0		+1.0, 0, +2.0
y3F1.0		–1.0, –2.0, 0

3	Compose picture, focus and shoot.
	• Compensated shutter speed and aperture values are displayed during
	shooting.
	• To cancel the Bracketing, rotate the Main-Command Dial while pressing the
	Auto Exposure/Flash Exposure Bracketing button W so z disappears
	from the LCD panel. The number of shots and compensated EV values
	previously selected will remain.
	• If the exposure compensation function (page 56) is also set, Bracketing will
	be combined with the exposure compensation values. It is useful to perform
	Bracketing with a compensated value of over +2 EV or under –2 EV.
	• With film advance mode in continuous shooting (C or Cs), fully depress and
	hold the shutter release button until the set number of shots has been
	taken and film advance stops automatically.	Exposure
	switch off during Bracketing, the remaining shots can be taken after the
	• If the end of the film roll is reached during Bracketing, the remaining shots

can be taken after new film has been loaded. Also, if you turn the power

power is turned back on.

• Bracketing is performed with one frame at a time when the self-timer (page 67) is set.

· 3: Bracketing order can be set to change from negative EV value to positive EV value (page 71).

59