Nikon F 100 Auto Exposure/Flash Exposure Bracketing options, Easy Exposure Compensation

Menu/Features of Custom Setting—continued

6. Focus area selection changed to continuously in the same direction (page 37)

Options: 0: Disabled (initial setting) 1: Enabled

At default setting, the focus area can be selected by pressing the focus area selector in the desired direction. However, it can be set to be changed continuously in the same direction. For example, when the top of the focus area selector is pressed, focus area continues to change from top, bottom, middle and so on. With this option, focus area can be switched to the opposite position without pressing the opposite position on the focus area selector.

7. Auto Exposure Lock when shutter release button is lightly pressed (page 54)

Options: 0: Disabled (initial setting) 1: Enabled

At default setting, Auto Exposure Lock can be performed by pressing the ‚ button. However, Auto Exposure can be set to be locked by lightly pressing the shutter release button.

8. Film advance with closing the camera back (when power switch is on) (page 21)

Options: 0: Disabled (initial setting) 1: Enabled

At default setting, film advances to the first frame after it is loaded, the camera back is closed and the shutter release button is fully depressed. However, film advance can be set to start when the camera back is closed.

9. Dynamic AF Mode with Closest Subject Priority in Single Servo AF (page 39)

Options: 0: Enabled (initial setting) 1: Disabled

At default setting, Dynamic AF Mode with Closest Subject Priority (page 39) is activated when Dynamic AF mode is selected in Single Servo AF. However, Dynamic AF Mode with Closest Subject Priority can be set to be disabled in Single Servo AF.

10.Dynamic AF Mode with Closest Subject Priority in Continuous Servo AF (page 39)

Options: 0: Disabled (initial setting) 1: Enabled

At default setting, selecting Dynamic AF in Continuous Servo AF does not activate Dynamic AF Mode with Closest Subject Priority (page 39). However, Dynamic AF Mode with Closest Subject Priority can be set to be activated in Continuous Servo AF.

72

11.Auto Exposure/Flash Exposure Bracketing options (page 57)

Options: AS: Simultaneous activation of Auto Exposure/Flash Exposure	Setting
AE: Only Auto Exposure Bracketing activated
Bracketing (initial setting)
Sb: Only Flash Exposure Bracketing activated	Custom
At default setting, Auto Exposure and Flash Exposure Bracketing are

activated simultaneously. However, only Auto Exposure or Flash Exposure Bracketing can be set to be activated.

12.Switching Command Dial operations (pages 48-53)

Options: 0: Disabled (initial setting) 1: Enabled

Unlike the default Command Dial operations, the Sub-Command Dial can be set to select shutter speed (in Shutter-Priority Auto or Manual exposure mode) and the Main-Command Dial to select aperture (in Aperture-Priority Auto or Manual exposure mode).

13.Easy Exposure Compensation (page 56)

Options: 0: Disabled (initial setting) 1: Enabled

When the Easy Exposure Compensation is activated, exposure compensation can be performed, without pressing the ˚ button, by simply rotating the Sub-Command Dial (in Programmed Auto or Shutter- Priority Auto exposure mode) or Main-Command Dial (in Aperture-Priority Auto or Manual exposure mode).

•If the exposure compensation values are set to change in Custom Setting menu 2, up/down to ±5 EV in 1/2 or 1 steps can be set.

•If the Command Dial operations are switched in Custom Setting menu 12, Main- and Sub-Command Dials operate under opposite conditions except in Programmed Auto exposure mode.

14.Film advance in multiple exposure (page 61)

Options: 0: Single frame shooting (initial setting) 1: Continuous shooting

At default setting, the shutter is released once each time the shutter release button is fully depressed in multiple exposure (single frame shooting). However, it can be changed to continuous shooting where the shutter can be continuously released as long as the shutter release button is fully depressed.

73