Manuals / Proxim / Computer Equipment / Webcam

Proxim CPN 65755B manual Command Line Interface Does Not Work, Tftp Server Does Not Work

Models: CPN 65755B

1 121

Download 121 pages 21.82 Kb

Page 116

Tsunami MP.11and MP.11a Installation and Management

Command Line Interface Does Not Work

If you cannot connect to the MP.11/a through the network:

1.Connect a computer to the serial port of the MP.11/a and check the SNMP table. The SNMP table can restrict telnet or HTTP access. For more information, see “Serial Port” on page 25.

2.Open a command prompt window and enter: ping <ip address MP.11> (for example ping 10.0.0.1).

ºIf the MP.11/a does not respond, ensure that you have the correct IP address.

ºIf the MP.11/a responds, the Ethernet connection is working properly; continue with this procedure.

3.Ensure that you have not exceeded the maximum number of CLI sessions.

TFTP Server Does Not Work

With TFTP, you can transfer files to and from the MP.11/a. Also see “TFTP Server Setup” on page 103. If a TFTP server is not properly configured and running, you cannot upload and download files. The TFTP server:

▪Can be situated either local or remote

▪Must have a valid IP address

▪Must be set for send and receive without time-out

▪Must be running only during file upload and download

If the TFTP server does not upload or download files, it could mean:

▪The TFTP server is not running

▪The IP address of the TFTP server is invalid

▪The upload or download directory is not correctly set

▪The file name is not correct

Online Help Is Not Available

Online help does not appear when the ? (question mark) button is clicked in the Web Interface:

1.Make sure that the Help files are installed on your computer or server. Also see “Installing Documentation and Software”.

2.Verify whether the path of the help files in the Web Interface refers to the correct directory. See “Help” on page 78.

Appendix B. Troubleshooting	116
CPN 65755B	Issue Date: August 2003

Image 116

Proxim CPN 65755B manual Command Line Interface Does Not Work, Tftp Server Does Not Work, Online Help Is Not Available

Contents

Tsunami MP.11 and MP.11a FCC Compliance CopyrightTrademarks Contents 118 Overview Wireless Network Topologies Point-to-Point LinkActive Ethernet Point-to-Multipoint NetworkInstallation Identifying Network Topology and EquipmentFinding a Suitable Location Installing the MP.11/a Product PackageInstallation Procedure Tsunami MP.11and MP.11a Installation and Management Tsunami MP.11and MP.11a Installation and Management Attaching a Kensington Security Lock Optional Switching on the MP.11/a Power Ethernet Link Wireless LinkInstalling Documentation and Software Desktop MountingOnline help Documentation ScanToolWall Mounting Ceiling Mounting Management Overview SnmpSetting the IP Address Manually Dynamic IP Address with Dhcp WEB Interface Overview Dynamic Frequency Selection MP.11A OptionsSelecting a Country Ethernet Port Command Line Interface OverviewTransmit Power Control Male Connector Female Connector Serial PortHyperTerminal Connection Properties Basic Management Applying Changes Rebooting and ResettingRebooting Resetting Hardware Soft Reset to Factory DefaultSystem Status Country Tsunami MP.11a units only System ConfigurationSystem Name Contact Name, Contact Email, and Contact Phone Mode of OperationLocation IP Configuration Interface Configuration WirelessTransmit Power Control Tsunami MP.11a units only Interface TypeBase Station System Name Network NameEnable Turbo Mode Frequency ChannelRegistration Timeout Data RateSatellite Density Network SecretMonitoring Settings ConfigurationInterfaces Security Settings Encrypt Data Transmissions UsingEncryption Encryption StatusPasswords Changing the Telnet PasswordChanging the Web Interface Password Changing the Snmp PasswordWeb Interface StatusSystem Status Status tab shows the System Status and the System TrapsSystems Traps Event LogSystem Status Configure SystemObjectID Ethernet MAC AddressDescriptor Up TimeIP Configuration NetworkDhcp Relay Agent Spanning Tree IP Routes Wireless Transmit Power Control Tsunami MP.11a only Enable Turbo Mode MP.11a only Ethernet Auto-speed-auto-duplexSlot A, or None Trap Groups Trap Host TableRIP RIP Example BSUSU1 100.0.0.0 100.0.0.1 metricRIP Notes TimeoutTelnet Password and timeout SerialMAC Authentication SecurityRadius Authentication EncryptionFiltering Ethernet ProtocolEthernet Protocol Filtering Filter Operation TypeStatic MAC Pair Filtering Wireless Threshold Storm ThresholdPer Address Threshold Ethernet ThresholdBroadcast Protocol Filtering IP Access Table DFS Requirement Additional Interface InformationDynamic Frequency Selection Tsunami MP.11a only Wireless Outdoor Router Protocol Satellite DensityMonitor GeneralReceive Sensitivity Threshold Defer ThresholdWorp Radius Per StationFeatures Link TestTsunami MP.11and MP.11a Installation and Management IP ARP Table Learn Table Commands DownloadServer IP address File NameReboot UploadReset Help LinkCommand Line Interface Boot Loader Command Line InterfaceCLI Terminology TftpKey Combination Description Command ActionNavigation and Special Keys Done Command Download Command? Question Mark Download ?Exit Command Help CommandPasswd Command History CommandLog Command Quit Command Reboot CommandSave Command Search CommandUpload Command CLI Basic Management CommandsShow Command Basic CLI Management Commands Enable or disable dynamic host configuration Show and SET ParametersBroadcast Filtering Parameters Dhcp Relay ParametersFeature Parameter Ethernet Filtering ParametersHttp WEB Browser Parameters Inventory Management ParametersMAC Access Control Table Parameters Link Integrity ParametersMiscellaneous Parameters Network ParametersSerial Port Setup Radius ParametersRIP Interface Parameters Serial ParametersSnmp Parameters Security ParametersEnable and disable specific addresses Static MAC Address Filter ParameterStatistic Parameters Storm Threshold ParametersTftp Parameters System ParametersTelnet Parameters Wireless Interface Parameter Configure wireless settingsWireless Interface Security Parameters Worp ParametersTable Parameters Macacltbl Index Entering Strings Set sysname Front LobbyViewing Table Contents Creating a Table RowModifying a Table Entry Modifying Several Table EntriesSet snmpipaccesstbl 2 status Enabling, Disabling, or Deleting a Table RowCountry Index Code Country Code TableSet wif 3 countrycode 158 set wif 3 countrycode tw Procedure Description ProceduresTftp Server Setup WEB Interface Image File Download Configuration BackupFile Type Config File Operation Upload Configuration Restore Soft Reset to Factory DefaultFile Type Config File Operation Download Click the Reset to Factory Default buttonHard Reset to Factory Default Forced ReloadDownload with CLI Image File Download with the BootloaderDownload with ScanTool Command prompt is displayed enter the following commands Appendix A. Specifications Hardware SpecificationsRadio Specifications Channel FrequenciesAppendix B. Troubleshooting LED IndicatorsMP.11/a Does Not Boot Serial Link Does Not WorkHyperTerminal Connection Problems Ethernet Link does not work Setup and Configuration IssuesLost the MP.11/a Password Ping ip address MP.11 for example ping MP.11/a Responds SlowlyWeb Interface Does Not Work Online Help Is Not Available Command Line Interface Does Not WorkTftp Server Does Not Work Changes Do Not Take Effect Appendix C. Support and Contacts Glossary ARPHttp Icmp WEP