Tsunami MP.11and MP.11a Installation and Management
SHOW AND SET PARAMETERS
The following table details the non-table parameters available to be viewed and set within the MP.11/a
CLI.
R = Read-only
W = Write-only
RW = Read-Write
BROADCAST FILTERING PARAMETERS
broadcastflttbl RW
Broadcast Filter Table
index R
Index
protoname R
Protocol name
direction RW
Filtering Direction [1=ethernet to wireless, 2=wireless to ethernet,
3=both]
status RW
Status of table entry [1=enable, 2=disable]
DHCP RELAY PARAMETERS
Enable or disable dynamic host configuration
dhcprelay R
DHCP Relay Group
dhcprelaystatus RW
DHCP Relay Status [1=enable, 2=disable]
dhcprelaytbl RW
DHCP Relay Agent IP Table
index R
Index (maximum of ten table entries)
dhcprlyipaddr RW
DHCP Server IP address
dhcprlycmt RW
Comment
dhcprlystatus RW
Status of table entry [1=enable, 2=disable, 3=delete, 4=create]
ETHERNET PARAMETERS
ethernet RW
Ethernet Configuration Table
index R
Index
etherspeed RW
Speed [1=10M Half Duplex
2=10M Full Duplex
3=10M Auto Duplex
4=100M Half Duplex,
5=100M Full Duplex
6=Auto Speed Half Duplex 7=Auto Speed Auto Duplex]
ethermacaddr RW
MAC address
ethrxbwlimit RW
Incoming bandwidth limit
ethtxbwlimit RW
Outgoing bandwidth limit
Chapter 6. Command Line Interface 88
CPN 65755 Issue Date: August 2003