Manuals / Proxim / Computer Equipment / Webcam

Proxim CPN 65755B manual IP Configuration

Models: CPN 65755B

1 121

Download 121 pages 21.82 Kb

Page 33

Tsunami MP.11and MP.11a Installation and Management

IP CONFIGURATION

The IP Configuration window lets you change the MP.11/a IP parameters. These settings differ when the MP.11/a is in Router mode.

To go to this page, click the Configure button, the Network tab, then the IP Configuration sub-tab.

If the device is configured in Bridge mode, you can set the following parameter:

IP Address Assignment Type

Select Static if you want to assign a static IP address to the MP.11/a; select Dynamic to have the device run in DHCP client mode, which gets an IP address automatically from a DHCP server over the network. If you do not have a DHCP server or if you want to manually configure the IP settings, set this parameter to Static.

You can set the following remaining parameters only when the IP Address Assignment Type is set to Static.

IP Address

The static IP address of the MP.11/a (default IP address is 10.0.0.1).

Subnet Mask

The mask of the subnet to which the MP.11/a is connected (default subnet mask is 255.0.0.0).

Default Router IP Address

The IP address of the default gateway.

Default TTL

The default time-to-live value.

Chapter 4. Basic Management	33
CPN 65755	Issue Date: August 2003

Image 33

Proxim CPN 65755B manual IP Configuration

Contents

Tsunami MP.11 and MP.11a Copyright TrademarksFCC Compliance Contents 118 Overview Point-to-Point Link Wireless Network TopologiesPoint-to-Multipoint Network Active EthernetIdentifying Network Topology and Equipment InstallationFinding a Suitable Location Product Package Installing the MP.11/aInstallation Procedure Tsunami MP.11and MP.11a Installation and Management Tsunami MP.11and MP.11a Installation and Management Attaching a Kensington Security Lock Optional Power Ethernet Link Wireless Link Switching on the MP.11/aDesktop Mounting Installing Documentation and SoftwareOnline help Documentation ScanToolWall Mounting Ceiling Mounting Snmp Management OverviewSetting the IP Address Manually Dynamic IP Address with Dhcp WEB Interface Overview MP.11A Options Selecting a CountryDynamic Frequency Selection Command Line Interface Overview Transmit Power ControlEthernet Port Serial Port Male Connector Female ConnectorHyperTerminal Connection Properties Basic Management Rebooting and Resetting RebootingApplying Changes Soft Reset to Factory Default Resetting HardwareSystem Status System Configuration System NameCountry Tsunami MP.11a units only Mode of Operation LocationContact Name, Contact Email, and Contact Phone IP Configuration Wireless Interface ConfigurationInterface Type Transmit Power Control Tsunami MP.11a units onlyBase Station System Name Network NameFrequency Channel Enable Turbo ModeData Rate Registration TimeoutSatellite Density Network SecretConfiguration Monitoring SettingsInterfaces Encrypt Data Transmissions Using Security SettingsEncryption Encryption StatusChanging the Telnet Password PasswordsChanging the Web Interface Password Changing the Snmp PasswordStatus Web InterfaceSystem Status Status tab shows the System Status and the System TrapsEvent Log System StatusSystems Traps System ConfigureEthernet MAC Address ObjectIDDescriptor Up TimeNetwork IP ConfigurationDhcp Relay Agent Spanning Tree IP Routes Wireless Transmit Power Control Tsunami MP.11a only Enable Turbo Mode MP.11a only Auto-speed-auto-duplex EthernetTrap Host Table Slot A, or None Trap GroupsRIP BSU RIP ExampleSU1 100.0.0.0 100.0.0.1 metricTimeout TelnetRIP Notes Serial Password and timeoutSecurity MAC AuthenticationEncryption Radius AuthenticationEthernet Protocol FilteringFilter Operation Type Ethernet Protocol FilteringStatic MAC Pair Filtering Storm Threshold Wireless ThresholdPer Address Threshold Ethernet ThresholdBroadcast Protocol Filtering IP Access Table Additional Interface Information Dynamic Frequency Selection Tsunami MP.11a onlyDFS Requirement Satellite Density Wireless Outdoor Router ProtocolGeneral MonitorReceive Sensitivity Threshold Defer ThresholdWorp Per Station RadiusLink Test FeaturesTsunami MP.11and MP.11a Installation and Management IP ARP Table Learn Table Download CommandsServer IP address File NameUpload RebootHelp Link ResetBoot Loader Command Line Interface Command Line InterfaceTftp CLI TerminologyCommand Action Navigation and Special KeysKey Combination Description Download Command Done Command? Question Mark Download ?Help Command Exit CommandHistory Command Log CommandPasswd Command Reboot Command Quit CommandSave Command Search CommandCLI Basic Management Commands Show CommandUpload Command Basic CLI Management Commands Show and SET Parameters Enable or disable dynamic host configurationBroadcast Filtering Parameters Dhcp Relay ParametersEthernet Filtering Parameters Feature ParameterHttp WEB Browser Parameters Inventory Management ParametersLink Integrity Parameters MAC Access Control Table ParametersMiscellaneous Parameters Network ParametersRadius Parameters Serial Port SetupRIP Interface Parameters Serial ParametersSecurity Parameters Snmp ParametersStatic MAC Address Filter Parameter Enable and disable specific addressesStatistic Parameters Storm Threshold ParametersSystem Parameters Telnet ParametersTftp Parameters Configure wireless settings Wireless Interface ParameterWorp Parameters Wireless Interface Security ParametersTable Parameters Macacltbl Index Set sysname Front Lobby Entering StringsCreating a Table Row Viewing Table ContentsModifying a Table Entry Modifying Several Table EntriesEnabling, Disabling, or Deleting a Table Row Set snmpipaccesstbl 2 statusCountry Code Table Set wif 3 countrycode 158 set wif 3 countrycode twCountry Index Code Procedures Tftp Server SetupProcedure Description Configuration Backup File Type Config File Operation UploadWEB Interface Image File Download Soft Reset to Factory Default Configuration RestoreFile Type Config File Operation Download Click the Reset to Factory Default buttonForced Reload Hard Reset to Factory DefaultImage File Download with the Bootloader Download with ScanToolDownload with CLI Command prompt is displayed enter the following commands Hardware Specifications Appendix A. SpecificationsChannel Frequencies Radio SpecificationsLED Indicators Appendix B. TroubleshootingSerial Link Does Not Work MP.11/a Does Not BootHyperTerminal Connection Problems Setup and Configuration Issues Lost the MP.11/a PasswordEthernet Link does not work MP.11/a Responds Slowly Web Interface Does Not WorkPing ip address MP.11 for example ping Command Line Interface Does Not Work Tftp Server Does Not WorkOnline Help Is Not Available Changes Do Not Take Effect Appendix C. Support and Contacts ARP GlossaryHttp Icmp WEP