Proxim CPN 65755B manual Viewing Table Contents, Creating a Table Row, Modifying a Table Entry

Tsunami MP.11and MP.11a Installation and Management

Viewing Table Contents

You can view the contents of a table as follows:

show <table name>

Example: This command displays all parameter values of the SNMP IP access table (snmpipaccesstbl).

show snmpipaccesstbl

Creating a Table Row

You can create a table row as follows:

set <table name> 0 <parameter 1 name> <value 1> … <parameter n name> <value n>

When you create a table row, you must use 0 as row index. Only the mandatory parameters are required. Optional parameters automatically receive the default value unless a value is given.

Example:

set snmpipaccesstbl 0 ipaddr 10.0.0.10 submask 255.255.0.0

This command adds a row to the SNMP IP access table (snmpipaccesstbl) with the IP address

(ipaddr) and subnet mask (submask) parameters, which are respectively assigned 10.0.0.10 and 255.255.0.0.

Modifying a Table Entry

If you want to change a table entry, you must indicate the index of the table row and the parameter that must be modified.

Example:

set snmpipaccesstbl 1 ipaddr 10.0.0.11

This command changes the IP address (ipaddr) at row index 1 of the SNMP IP access table

(snmpipaccesstbl) into 10.0.0.11.

Modifying Several Table Entries

You can also modify several table entries at once by indicating the index of the table row and the parameters that must be modified. With the search command, you can see which parameters are in the table.

Example:

set snmpipaccesstbl 1 ipaddr 10.0.0.12 submask 255.255.255.248 cmt “First Row”

Chapter 6. Command Line Interface	100
CPN 65755	Issue Date: August 2003