Tsunami MP.11and MP.11a Installation and Management
LINK INTEGRITY PARAMETERS
linkinttbl RW
Link Integrity Target IP Address Table
index R
Index
cmt RW
Comment
ipaddr RW
IP address
status RW
Status of table entry [1=enable, 2=disable, 3=delete, 4=create]
MAC ACCESS CONTROL TABLE PARAMETERS
Control wireless access based upon MAC address
macacl R
MAC Access Control Group
macacltbl RW
MAC Access Control Table
index R
Index
macaddr RW
MAC address
cmt RW
Comment
status RW
Status of table entry [1=enable, 2=disable]
macaclstatus RW
Status [1=enable, 2=disable]
macacloptype RW
Operation type [1=allow, 2=deny]
MISCELLANEOUS PARAMETERS
queries R
RIP v2 Global Queries
routechg R
RIP v2 Global Route Changes
NETWORK PARAMETERS
Configure IP and Network Settings
network R
Network Group
ip R
IP Group (same as Network Group)
ipaddr RW
IP Address Table
index R Index [1=Ethernet, 2=loopback, 3=wireless]
ipaddress RW IP address
ipsubmask RW Subnet mask
ipaddrtype RW
Address type [1=static, 2=dynamic]
ipgw RW
Default Router IP address
ipttl RW
Default time-to-live
iproutes RW
IP Route Table (Router mode only)
ipaddr R IP address
metric RW Routing metric
routtype RW Route Type
ipsubmask RW Subnet Mask
ipgw RW Gateway IP address
Example: This command changes the first entry in the IP Address table:
set ipaddr 1 ipaddress 150.80.0.1 ipsubmask 255.255.255.0
Chapter 6. Command Line Interface 90
CPN 65755 Issue Date: August 2003