Proxim CPN 65755B 2) Network

Tsunami MP.11and MP.11a Installation and Management

2) Network

IP Configuration

The IP Configuration window lets you change the MP.11/a IP parameters. These settings differ when

the MP.11/a is in Router mode.

Click the Configure button, the Network tab, and the IP Configuration sub-tab to view and configure

local IP address information. See “Setting the IP Address Manually” on page 20 for more information.

If the device is configured in Bridge mode, you can set the following parameter:

IP Address Assignment Type

Select Static if you want to assign a static IP address to the MP.11; select Dynamic to have the

device run in DHCP client mode, which gets an IP address automatically from a DHCP server over

the network. If you do not have a DHCP server or if you want to manually configure the IP settings,

set this parameter to Static.

When the MP.11/a is in Bridge mode, only one IP address is required. This IP address also can be

changed with ScanTool (see “Setting the IP Address Manually” on page 20). In Router mode, both

Ethernet and Wireless interfaces require an IP address.

You can set the remaining parameters only when the IP Address Assignment Type is set to Static.

IP Address

The static IP address of the MP.11/a (default IP address is 10.0.0.1).

Subnet Mask

The mask of the subnet to which the MP.11/a is connected (the default subnet mask is 255.0.0.0).

Default Router IP Address

The IP address of the default gateway.

Chapter 5. Web Interface 46

CPN 65755 Issue Date: August 2003

Contents

Main COPYRIGHT TRADEMARKS FCC COMPLIANCE Consult the dealer or an experienced radio or television technician for help. Contents Page Chapter 1. Overview WIRELESS NETWORK TOPOLOGIES ACTIVE ETHERNET Chapter 2. Installation IDENTIFYING NETWORK TOPOLOGY AND EQUIPMENT FINDING A SUITABLE LOCATION INSTALLING THE MP.11/a The Product Package One metal base for ceiling or desktop mounting (includes two screws) Mounting hardware One power supply One Tsunami MP.11/a Installation CD-ROM containing: Page Page Page Attaching a Kensington Security Lock (Optional) SWITCHING ON THE MP.11/a INSTALLING DOCUMENTATION AND SOFTWARE MOUNTING THE MP.11/a Desktop Mount Wall Mount Ceiling Mount Desktop Mounting Wall Mounting Ceiling Mounting Chapter 3. Management Overview MP.11/a IP ADDRESS Setting the IP Address Manually Dynamic IP Address with DHCP WEB INTERFACE OVERVIEW MP.11A OPTIONS Selecting a Country Dynamic Frequency Selection Transmit Power Control COMMAND LINE INTERFACE OVERVIEW Ethernet port connected through the network or with a cross-over Ethernet cable between the Serial port of the MP.11/a Ethernet Port Serial Port A serial RS-232C cable with a male and a female DB-9 connector. The serial cable must have a An ASCII terminal program, such as HyperTerminal. HyperTerminal Connection Properties Chapter 4. Basic Management REBOOTING AND RESETTING Applying Changes Rebooting Resetting Hardware Soft Reset to Factory Default Page SYSTEM CONFIGURATION Page IP CONFIGURATION INTERFACE CONFIGURATION Wireless Page Page Page Ethernet Port MONITORING SETTINGS Page SECURITY SETTINGS Encryption Passwords Changing the Telnet Password Changing the Web Interface Password UPGRADING THE MP.11/a Chapter 5. Web Interface STATUS Event Log CONFIGURE 1) System Page 2) Network IP Configuration DHCP Relay Agent Spanning Tree IP Routes 3) Interfaces Wireless Page Page Ethernet 4) SNMP 5) RIP There is no option to turn off receiving RIP advertisements. Once the unit is in Router mode, it RIP Example Page Page 9) Security MAC Authentication RADIUS Authentication Encryption Page Page Static MAC Pair Filtering Storm Threshold A maximum number of frames per second as received from a single network device (identified by its An absolute maximum number of messages per port. Broadcast Protocol Filtering IP Access Table ADDITIONAL INTERFACE INFORMATION Dynamic Frequency Selection (Tsunami MP.11a only) DFS Requirement Wireless Outdoor Router Protocol Satellite Density MONITOR 1) Wireless General WORP Page Page Page 7) Interfaces 8) IP ARP Table 9) IP Routes 10) Learn Table COMMANDS 1) Download Page 4) Reset 5) Help Link Chapter 6. Command Line Interface BOOT LOADER COMMAND LINE INTERFACE CLI TERMINOLOGY NAVIGATION AND SPECIAL KEYS COMMANDS ? (Question Mark) Done Command Download Command Exit Command Help Command History Command Log Command Passwd Command Quit Command Reboot Command Save Command Search Command Set Command CLI BASIC MANAGEMENT COMMANDS Page SHOW AND SET PARAMETERS Page Page Page Page Page Page Page Page Table Parameters Page Entering Strings Viewing Table Contents Creating a Table Row Modifying a Table Entry Modifying Several Table Entries Enabling, Disabling, or Deleting a Table Row COUNTRY CODE TABLE Chapter 7. Procedures TFTP SERVER SETUP WEB INTERFACE IMAGE FILE DOWNLOAD CONFIGURATION BACKUP CONFIGURATION RESTORE SOFT RESET TO FACTORY DEFAULT HARD RESET TO FACTORY DEFAULT FORCED RELOAD 3. Follow the procedure Image File Download with the Boot Loader to download an image file. IMAGE FILE DOWNLOAD WITH THE BOOTLOADER Download with ScanTool Download with CLI Page Appendix A. Specifications HARDWARE SPECIFICATIONS RADIO SPECIFICATIONS Channel Frequencies Appendix B. Troubleshooting LED INDICATORS MP.11/a CONNECTIVITY ISSUES MP.11/a Does Not Boot Serial Link Does Not Work HyperTerminal Connection Problems Ethernet Link does not work SETUP AND CONFIGURATION ISSUES Lost the MP.11/a Password The MP.11/a Responds Slowly No DHCP server is available. The IP address of the MP.11/a is already in use. There is too much network traffic. Web Interface Does Not Work Page Changes Do Not Take Effect Appendix C. Support and Contacts Glossary