Tsunami MP.11and MP.11a Installation and Management
Note: To use HyperTerminal for CLI access, make sure to check “Send line ends with line feeds” in the ASCII Setup window (click Properties from the HyperTerminal window; select Setup, then ASCII Setup. See “HyperTerminal Connection Properties” on page 26 for more information).
7) Serial
Click the Configure button and the Serial tab to change the serial port settings.
8) HTTP
Click the Configure button and the HTTP tab to view or change Web Interface parameters, including
password and timeout.
Chapter 5. Web Interface | 58 |
CPN 65755 | Issue Date: August 2003 |
