Copying Pictures to the Computer

Before proceeding, be sure you have installed ViewNX-i (0 104).1 Connect the USB cable.

After turning the camera off and ensuring that a memory card is inserted, connect the supplied USB cable as shown and then turn the camera on.

AUse a Reliable Power Source

To ensure that data transfer is not interrupted, be sure the camera battery is fully charged.

AConnecting Cables

Be sure the camera is off when connecting or disconnecting inter- Q face cables. Do not use force or attempt to insert the connectors at

an angle.DDuring Transfer

Do not turn the camera off or disconnect the USB cable while transfer is in progress.

DUSB Hubs

Transfer may not proceed as expected if the camera is connected via a USB hub or keyboard.

105