Engage the film’s perforations
4. with the sprocket teeth. Turn the takeup spool slightly with your thumb, so that the first or second perforation at the bottom edge of the film s engaged with the small tooth at the bottom of the slot in the takeout spool, and the top and bottom perforations mesh securely with the sprockets 35
Advance the film by rotating the takeup spool further with your thumb. Make
2. sure the perforations on both film edges are securely engaged with the sprocket teeth. Also confirm that the film is properly seated between both film guide rails 29 and there is no film slack Then close the camera back until it snaps shut.
WWW.LENSINC.NET / | 13 |
