Nikon NX2 Linking Enhancements, Swapping Enhancements, To link enhancements, follow these steps

Linking Enhancements

Linking enhancements within the Edit List palette enables you to apply the selective controls that are used within one step to more than one enhancement. By default, each enhancement is applied to a separate step. By linking two or more enhancements together in the same step, each of those enhancements can benefit from the same selective controls that were applied to that step.

To link enhancements, follow these steps:

1Select the first enhancement from either the Adjust or Filter menus. Adjust the controls for the first

enhancement to suit your taste.

2While holding down the Shift key, select the second enhancement from either the Adjust or Filter menus. This will cause another enhancement to be added to the same step. You can then modify

the second enhancement’s controls to suit your taste.

3Ifimage.desired, use one of the selection tools to determine where to apply both enhancements to the

APlease note: You may link any number of enhancements together within the same step, but please note that the greater the number of enhancements that are applied within the same step, the slower Capture NX 2 may be in displaying the results of those adjustments.

Swapping Enhancements

Enhancements from the Adjust and Filter menus may be swapped or substituted by selecting another available item from the adjustments and filters menu.

To swap one enhancement for another, follow these steps:

1

2

Click on the adjustments and filters pull-down menu in the step that contains the enhancement you would like to swap.

Select a different enhancement from the adjustments and filters pull-down menu. The selected enhancement will not be used in place of the previous enhancement within this step.

This is especially useful if you have made a selection, applied an enhancement to a step, and then want to see how a different enhancement will affect the image within the area identified by your selection.

Chapter 15 — Edit List Working with the Edit List 149