Nikon NX2 user manual Color Control Point Mode, All

4Adjust the remaining sliders connected to the color control point to adjust the color and light of the selected object.

Additional color control points can be added to the image by repeating the steps listed above.

To delete a color control point, click on the color control point in the image or in the Edit List palette and press the delete key on the keyboard.

After a color control point is added to the image, the following options will be available in the Color Control Point step of the Edit List palette:

Color Control Point Mode

The color control point mode pull-down menu enables you to determine which elements of the current object to affect with the color control point. Alternatively, click on the triangle displayed beneath the last slider of the control point. This will enable you to toggle between the current mode and the All mode.

BCS

The BCS mode is the default mode and provides you with size, brightness, contrast, and saturation sliders.

HSB

The HSB mode provides you with size, hue, saturation, and brightness sliders.

RGB

The RGB mode provides you with size, red, green, and blue sliders.

All

The All mode provides you with all available sliders: size, hue, saturation, brightness, contrast, red, green, blue, and warmth.

Chapter 13 — The Toolbar Color Control Point 105