Nikon NX2 user manual Toolbar Neutral Control Point

To add a neutral control point to your image, follow these steps:

1

2

3

Click on the neutral control point icon in the toolbar. The cursor will change to a crosshair.

Identify an object that should be neutral and click on

that object to place a neutral control point. A B / W / N Control Point step will be added to the Edit List

palette, with a neutral control point sub-step. You can reposition the neutral control point by clicking and dragging it. Please note that you may add multiple neutral control points.

Adjust the effect of the neutral control point by either clicking and dragging the red, green, and blue sliders, or by entering values directly into the text

boxes in the neutral control point sub-step of the B / W / N Control Point step in the Edit List palette.

After a neutral control point is added to the image, the following options will be available in the B / W / N Control Point step of the Edit List palette:

Chapter 13 — The Toolbar Neutral Control Point 99