Movies

56

Movies

Recording Movies

To shoot movies with sound recorded via the built-in microphone, follow the steps below.

1Rotate the mode dial to D.

Exposure count display shows maximum total length of movie that can be recorded.

2 Press the shutter-release button all

 

 

 

 

o

 

the way down to start recording.

 

 

Camera focuses on the subject in the center focus area.

A progress bar at the bottom of the monitor

shows the amount of recording time 41s remaining.

To end recording, press the shutter-release button all the way down a second time.

BRecording Movies

•Flash mode (A26) can only be used for time-lapse movies. Focus mode (A29) and exposure compensation (A30) are available in all modes. Self-timer (A28) cannot be used.

•Flash mode (A26), focus mode (A29), and exposure compensation (A30) settings cannot be applied or changed while movies are being recorded. Apply or change settings as necessary before movie recording begins.

•Optical zoom cannot be adjusted once movie recording begins. Digital zoom cannot be applied before movie recording begins. However, digital zoom (up to 2×) can be applied while movies, other than stop-motion movies, are being recorded.

DChanging Movie Settings

•[Movie options] and [Electronic VR] settings can be changed in the movie menu (A57).

• When [Movie options] is set to [Time-lapse movieP], movies are recorded without sound.