Connecting the Smart Device to the Camera

1 Press the Z(Wi-Fi) button on the camera.

•The screen shown on the right is displayed.

•If no connection confirmation is received from the smart device within three minutes, the message No access. is displayed and the camera returns to the Wi-Fi options screen.

•You can also select Connect to smart device in the Wi-Fi options menu to display the screen shown on the right.

Connect to smart device

SSID:

XXXXXXXXXXXXXXXXXX XXXXXX

Password:

XXXXXXXXXXXXXXXX

Cancel

Function LAN) (Wireless Fi-Wi the Using

2Set the Wi-Fi setting on the smart device to On.

•Check the user’s manual provided with your smart device for further details.

•After the network names (SSIDs) that can be used for the smart device are displayed, select the SSID displayed on the camera.

•When Auth./encryp. is set to WPA2-PSK-AESin the Wi-Fi options menu, the message for entering a password is displayed.

Enter the password that is displayed on the camera.

3Start the “Wireless Mobile Utility” installed on the smart device, while Negotiating... Please wait. is displayed on the camera.

•The screen for selecting “Take photos” or “View photos” is displayed.

•When the message “Cannot connect to camera.” is displayed, return to step 1 and retry the procedure.

•See “Installing the Software on the Smart Device” (A117).

C Touching an NFC-compatible Smart Device to the Camera for a Wi-Fi Connection

When you use a smart device that is compatible with near field communication (NFC) functions and runs on Android OS, you can establish a Wi-Fi connection and start the “Wireless Mobile Utility” by touching the NFC antenna on the smart device to the Y(N-Mark) on the camera.

118