Nikon SB-16 instruction manual Calculator dial, Camera

12. the

Set b zoohm setting @ kno on t e exposure

calculator dial.

Turn the zoom setting knob at the center on the dial until the zoom set- ting index @ is opposite the same letter as you selected in step 11 .

Note: The W, setting on the dial is used when the wide· flash adapter is attached to the flash unit with the zoom head set at Wi.

13. Set the shutter speed on

the camera.

The proper shutter speed setting for flash synchronization of each cam- era is listed on page 21 .

For example, set the shutter speed dial of F3-se ries cameras or the FE2 to A or set the shutter speed/mode selector of the FG to P or A.

Note: For TTL operation with a Nikon F3·series camera, the camera's backup mechanical release lever cannot be used with the shutter speed dial set at T (time). With the Nikon FA , FE2, FG or Nikonos -V, a mechanical shutter speed !i.e., M250, M90 or B) cannot be used for TTL operation.

Steps 14 through 17 are divid- ed into three sections accor- ding to the shooting mode selected. Section A is for TTL automatic operation (with an F3-series, FA, FE2, F-501/N2020, F-301/N2000, FG, or Nikonos-V camera), section B is for non.:rTL automatic operation, and section C is for progammed TTL auto operation (with the F-501/N2020 or F-301/N2000 camera set at a programmed exposure mede). For manual operation and syn- chronization with motor drive, see pages 23 and 24.

13