Nikon SB-400 instruction manual With fresh batteries

Power source / min.	Two AA-type penlight batteries (1.5V or lower) of any types:
recycling time / no.	Batteries	Min. recycling	Min. number of flashes*
of flashes (at full
		time (approx.)	/ interval between full
output)				En
			flash output and ready
With fresh batteries			light on
	Alkaline-manganese	3.9 sec.	140/3.9-30 sec.
(These data may
	(1.5V)
vary depending on
battery condition)	Lithium (1.5V)	4.2 sec.	250/4.2-30 sec.
	Oxyride (1.5V)	3.1 sec.	150/3.1-30 sec.
	Ni-MH (2600 mAh)	2.5 sec.	210/2.5-30 sec.
	(rechargeable) (1.2V)
	* When firing the Speedlight at full output once every 30
	seconds (120 seconds with lithium batteries).
Ready-light	• Lights up when the SB-400 is recharged and ready to fire.
	• Blinks to indicate: insufficient light / insufficient battery
	power / incompatibility of camera with SB-400 /overheating
Flash duration	1/1300 sec. at full output
(approx.)
Mounting foot	Provides secure attachment of SB-400 to camera’s accessory
lever lock	shoe using mount pin to prevent accidental detachment
Dimensions	Approx. 66 x 56.5 x 80mm (2.6 x 2.2 x 3.1 in.)
(W x H x D)
Weight	Approx. 127g (4.5 oz.)
(without batteries)
Included accessories	SS-400 Soft Case

•These performance specifications are applicable when fresh batteries are used at normal temperature (20ºC/68ºF).

•Specifications and design are subject to change without notice.

Oxyride Battery is a registered trademark of Matsushita Electric Industrial Co., Ltd. Products and brand names are trademarks or registered trademarks of their respective companies.

23