kRelease Mode

Choosing a Release Mode

To choose a release mode, press the release mode dial lock release and turn the release mode dial to the desired setting.

Mode

Description

S

Single frame: Camera takes one photograph each time shutter- release button is pressed.

Continuous low speed: While shutter-release button is held down,

CL

camera records photographs at the frame rate selected for Custom

Setting d2 (Shooting speed, 0 318) > Continuous low-speed (0 112).

 

Continuous high speed: While shutter-release button is held down,

k

CH

camera records photographs at the frame rate selected for Custom

 

Setting d2 (Shooting speed, 0 318) > Continuous high-speed

 

 

 

 

(0 112). Use for active subjects.

 

 

 

 

 

Quiet shutter-release: As for single-frame except that noise is reduced by

 

 

disabling beeps and minimizing sound produced when mirror drops

 

 

back into place. Beep does not sound when camera focuses

 

Jregardless of setting selected for Custom Setting d1 (Beep; 0 318) and mirror does not drop back into place until shutter-release button is returned to halfway position after shooting, allowing you to delay noise made by mirror. Mirror is quieter than in single-frame mode.

ESelf-timer: Use self-timer for self-portraits or to reduce blurring caused by camera shake (0 114).

Mirror up: Choose this mode to minimize camera shake in telephoto MUP or close-up photography or in other situations in which the slightest

camera movement can result in blurred photographs (0 116).

111