Jbutton

Sharing Custom Picture Controls

Custom Picture Controls created using the Picture Control Utility available with ViewNX 2 or optional software such as Capture NX 2 can be copied to a memory card and loaded into the camera, or custom Picture Controls created with the camera can be copied to the memory card to be used in other D4 cameras and compatible software and then deleted when no longer needed (if two memory cards are inserted, the card in the primary slot will be used; 0 95).

To copy custom Picture Controls to or from the memory card, or to delete custom Picture Controls from the memory card, highlight Load/Save in the Manage Picture Control menu and press 2. The following options will be displayed:

•Copy to camera: Copy custom Picture Controls from the memory card to custom Picture Controls C-1 through C-9 on the camera

and name them as desired.

• Delete from card: Delete selected custom Picture

Controls from the memory card. The confirmation

dialog shown at right will be J displayed before a Picture

Control is deleted; to delete

the selected Picture Control, highlight Yes and press J.

•Copy to card: Copy a custom Picture Control (C-1 through C-9) from the camera to a selected destination (1 through 99) on the memory card.

182