Attaching a Power Connector and AC Adapter

Turn the camera off before attaching an optional power connector and AC adapter.

1Remove the battery-chamber cover.

Lift the battery-chamber cover latch, turn it to the open (A) position (q), and remove the BL-6 battery-chamber cover (w).

2 Connect the AC adapter.

Pass the DC cable over the power connector cable guide (q) and slide it down until it is at the bottom of the slot, and then insert the DC plug into the DC IN connector (w).

3 Insert the power connector.

Fully insert the power connector into the battery chamber as shown.

n

396