Highlight Clean now and press J.
The camera will check the
image sensor and then Jbutton begin cleaning. This
process takes about 7 seconds; during this time, 1flashes in the top control panel and other operations can not be performed. Do not remove or disconnect the power source until cleaning is complete and 1is no longer displayed.
❚❚“CleanatStartup/Shutdown”
Choose from the following options:
| Option | Description |
5 Clean at startup | The image sensor is automatically cleaned each time | |
|
| the camera is turned on. |
| Clean at | The image sensor is automatically cleaned during |
6 shutdown | shutdown each time the camera is turned off. | |
7 | Clean at startup | The image sensor is cleaned automatically at startup |
& shutdown | and at shutdown. | |
| Cleaning off | Automatic image sensor cleaning off. |
n
400