BASIC OPERATION ------------
1. Open the battery chamber.
Unscrew the lid @ at the base of the handle and remove the battery clip .
2 Attach the bracket | 3 Secure the bracket |
• mounting adapter ® to | • mounting adapter. |
the speedlight's handle @ . | Tighten the screws to secure the |
First , use the screwdriver provided adapter into place. to loosen the two screws on the
bracket mounting adapter. Then, slip the adapter onto the speedlight's handle and slide it to. the desired position. Orient the adapter so that its flat side is in the same plane as the speedlight's exposure calculator dial ® . Make sure the locking wheel
®is facing toward the rear of the speedlight.
6
