Nikon SB 11 instruction manual

•If your SB-ll has not been used for a long time, its recycling time may be longer . To maintain the built-in condenser in peak condi - tion, thereby enabling you to use the SB-ll for many years, fire the flash unit a few times every month. After firing, wait until the ready-light lights, then turn off the power switch, remove the bat- teries , and store the SB-ll in a suitable location . This will pre- vent the condenser from deterio- rating .

•Keep the flash unit away from salt water and out of the rain .

•Neve r attempt to disassemble or repair the flash yourself . These delicate procedures should be left to an authorized service facility.

25