Nikon SB 11 Attach the bracket @ to, Attach the .bracket to, Speedhght Wheel completely

- ·BASIC OPERATION-continued------------

•
~--f	I
	- ~-
- --	--

7. Attach the bracket @ to

the camera.

Position the camera in the bracket with the bracket mounting pin @) on the same side of the camera as its rewind knob. Then, screw the brack- et's attachment screw @ into the camera's tripod socket to secure the two units together tightly.

Note: For attachment to the MD-4 Motor Drive, you must reposition the bracket's attachment scre w to the ather slot@. For details. refer 10 page 13.

8. Attach the .bracket to	9. Tighten the locking
the speedhght.	wheel completely.

Insert the bracket mounting pin into the hole in the bracket mounting adapter with the two dots @ aligned; rotate the camera forward .

8