Niles Audio HDL-6 manual Operation, Playing One Pair of Speakers At a Time

H I G H D E F I N I T I O N S P E A K E R S E L E C T I O N S Y S T E M

"TECH TIP"

If your amplifier or

receiver has "A" and "B" speaker- pair outputs, connect the HDL-6 to the "A" outputs. Do not connect anything to "B". This will prevent the amplifier or receiver from driving an unusually low impedance load.

Operation

You can use the HDL-6 in two ways: play one pair of speakers at a time, or play multiple pairs simultaneously.

If you intend to play more than one pair of speakers at the same time, you should become familiar with the operation of the HDL-6's PROTECTION button.

Playing One Pair of Speakers At a Time

1.Make sure the amplifier or receiver power is OFF, and set the volume to minimum.

2.Locate the ON/OFF button on the HDL-6 that corresponds to the speaker pair you wish to play. Set it to the ON posi- tion.

3.Turn on the amplifier or receiver and select a source, such as the tuner or CD player.

4.Slowly turn up the amplifier or receiver volume and set it to a comfortable (not maximum) listening level. Be careful not to overdrive or "clip" your amplifier. If the sound becomes muddy or distorted, you have reached the limit of your amplifier's volume capability and should reduce the volume quickly to avoid damaging your speakers.

5.To turn off the speaker pair, simply press the correspond- ing ON/OFF button on the HDL-6.

11