Niles Audio RCA3 specifications Once you have decided on the ideal location for

R E M O T E C O N T R O L A N Y W H E R E ! K I T

Repeat this procedure for each A/V component you wish to control.

When the A/V component responds repeatedly, peel off the protective backing on the MicroFlasher and place the MicroFlasher in that location.

If you get no response at all, call Niles Technical Support at 1-800-289-4434 (M-F 8:00 AM – 7:00 PM ET).

Step 5 – Mounting the Connection Hub Make sure that your system tested OK before proceeding

Figure 7: Locating IR Sensor	Once you have decided on the ideal location for
	the connection hub, unplug the 12VDC power

supply from the electrical outlet and disconnect the sensor and the MicroFlasher cables from the connection hub (Figure 8).

The connection hub can be either mounted on a wall using screws or placed on a shelf using the included adhesive feet (Figure 9).

9