![SPECIFICATIONS](/images/new-backgrounds/13385/1338521x1.webp)
SPECIFICATIONS
Driver Complement
One 12"
Amplifier Power
300 Watts (rms), less than 1% distortion;
600 Watts (peak)
Frequency Response
25 to 160 Hz, +/- 3 dB
Power Requirements
120 Vac, 60Hz or 220-240 Vac, 50/60Hz
NOTES
Weight
56 pound, shipping weight
Certification
•Meets FCC Part 15 and ICES-003, Class B for USA and Canada
•CSA Listed and tested under UL/EN60065 standard
•CE compliant for the EU
•C-Tick compliant for Australia and New Zealand
Overall Dimensions (with grille) 15.25" W x 18.5" H x 21" D
FCC INSTRUCTIONS TO THE USER
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment has been verified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with
18 |
| NILES AUDIO CORPORATION – |
| 19 |
|
|