APPLICATIONS
The Niles SW300
SW300 AND LINE-LEVEL CONNECTION TO SATELLITE LOUDSPEAKER SYSTEM
Set switch to ON and adjust FREQUENCY | Position SET UP switch | Set LOW PASS to closely | Adjust PHASE to |
to match low frequency cutoff of your | to the mode you wish to | match HIGH PASS | integrate subwoofer |
satellite speakers. | adjust MUSIC OR MOVIE | FREQUENCY control. | sound with system. |
Alternate configuration: | and adjust level controls | NOTE: Control does not |
|
Set switch to OFF to send full range | per instructions. | function when using LFE input. |
|
audio to L/R AUDIO OUT jacks. |
|
|
|
TWO SW300S AND SATELLITE LOUDSPEAKER SYSTEM
Set switch to ON and adjust FREQUENCY | Position SET UP switch | Set LOW PASS to closely | Adjust PHASE to |
to match low frequency cutoff of your | to the mode you wish to | match HIGH PASS | integrate subwoofer |
satellite speakers. | adjust MUSIC OR MOVIE | FREQUENCY control. | sound with system. |
Alternate configuration: | and adjust level controls | NOTE: Control does not |
|
Set switch to OFF to send full range | per instructions. | function when using LFE input. |
|
audio to L/R AUDIO OUT jacks. |
|
|
|
NOTE: ADJUST SETTING ON BOTH SW300 SUBS TO BE THE SAME
Niles
Receiver
|
| L | R |
|
| ||
Trigger output |
| Line outputs |
LFE Input
|
| Refer to Trigger Wiring section |
Optional Second Subwoofer | ||
|
| Left & Right line |
|
| level output |
LFE | L | R |
Home Theater |
|
|
Amplifier |
|
|
|
|
| Left & Right line |
|
| L | R | level inputs | SW300 Back |
|
| |||
|
|
| ||
Niles | R |
| L |
|
Amplifier |
|
|
|
|
|
|
| Speaker level |
|
Optional
DO not use these when using the
AUDIO IN ports
SW300 Back | SW300 Back |
Line inputs
LR
Niles
Amplifier
Optionally, you may wire in a similar fasion, using the speaker level inputs and outputs.
Figure 4. Stereo/dual subwoofer application
10 | Figure 3. Line level connections |
| |
|
NILES AUDIO CORPORATION – |
| 11 |
|